ibe_isi_bg

Ngwaahịa

Usoro GSA-PL, Ntugharị Otu Ntugharị Ndekọ zuru oke

nkowa nkenke:

Ihe ngbanwe nke GSA-PL dị n'otu ntụgharị zuru oke dị mma maka ngwa ụlọ ọrụ dị iche iche na-achọ koodu ntinye nwere ikike nke nrụpụta ọnọdụ zuru oke. Teknụzụ mmepụta dijitalụ zuru oke na-eme ka ọ bụrụ nhọrọ magburu onwe ya maka ngwa niile, ọkachasị ndị nwere oke mkpọtụ. Dị na ma gburugburu servo ma ọ bụ square flange arịọnụ, na a dịgasị iche iche nke njikọ na cabling nhọrọ, GSA-PL Series na-adị mfe emebere n'ime a dịgasị iche iche nke ngwa chọrọ. Na nhọrọ ya sara mbara nke nha nha nke na-akwado ọkwa ụlọ ọrụ mmepụta ihe, NMB bearings, na nhọrọ IP67 akara ya, ọ dị mma maka gburugburu ebe obibi siri ike. Housing Dia.: 38,50,58mm; siri ike / oghere Shaft dayameta: 6,8,10mm; Mkpebi: Max.16bits Interface: Parallel; Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;


  • ▶ Ogologo ebe obibi:38,50,58mm;
  • ▶ Ogologo osisi siri ike/ oghere:6,8,10mm;
  • ▶ Mkpebi:Max.16bits;
  • ▶ Voltaji na-ebunye:5v,8-29v;
  • ▶Interface:Yiri
  • ▶ Koodu mmepụta:ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Usoro GSA-PL, Ntugharị Otu Ntugharị Ndekọ zuru oke

    Ihe ngbanwe nke GSA-PL dị n'otu ntụgharị zuru oke dị mma maka ngwa ụlọ ọrụ dị iche iche na-achọ koodu ntinye nwere ikike nke nrụpụta ọnọdụ zuru oke. Teknụzụ mmepụta dijitalụ zuru oke na-eme ka ọ bụrụ nhọrọ magburu onwe ya maka ngwa niile, ọkachasị ndị nwere oke mkpọtụ. Dị na ma gburugburu servo ma ọ bụ square flange arịọnụ, na a dịgasị iche iche nke njikọ na cabling nhọrọ, GSA-PL Series na-adị mfe emebere n'ime a dịgasị iche iche nke ngwa chọrọ. Na nhọrọ ya sara mbara nke nha nha nke na-akwado ọkwa ụlọ ọrụ mmepụta ihe, NMB bearings, na nhọrọ IP67 akara ya, ọ dị mma maka gburugburu ebe obibi siri ike. Housing Dia.: 38,50,58mm; siri ike / oghere Shaft dayameta: 6,8,10mm; Mkpebi: Max.16bits Interface: Parallel; Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;

    Asambodo: CE,ROHS,KC,ISO9001

    Oge ndu:N'ime otu izu mgbe ịkwụ ụgwọ zuru ezu; Nnyefe site na DHL ma ọ bụ ndị ọzọ dị ka a tụlere;

    ▶ Ebe obibi:38,50,58mm;

    ▶ Ogologo ogwe osisi siri ike / oghere: 6,8,10mm;

    ▶Interface: Parallel;

    ▶ Mkpebi: Max.16bits;

    ▶ Voltage na-ebunye: 5v, 8-29v;

    ▶ Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;

    ▶ A na-eji ya n'ọtụtụ ebe dị iche iche nke njikwa akpaaka na sistemu nha, dị ka nrụpụta igwe, mbupu, textile, mbipụta, ụgbọ elu, ụlọ ọrụ agha igwe nyocha, igwe mbuli, wdg.

    ▶Vibration-eguzogide, corrosion-eguzogide, mmetọ-eguzogide;

    Njirimara ngwaahịa
    Ụlọ Dia.: 58mm
    Shaft siri ike: 10mm
    Data Eletriki
    Mkpebi: Max.16bits, Otu ntụgharị max.16bits, ngụkọta Max.29bits

     

    Ihuenyo: Parallel/NPN/PNP onye na-anakọta oghe, Push pull, Line Driver;
    Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD
    Voltaji na-eweta: 8-29V
    Oke. Nzaghachi ugboro ugboro 300Khz
     

    Mepee mkpokọta

    Mpụta voltaji

    Onye ọkwọ ụgbọ ala

    Pịa Pull

    Oriri ugbu a ≤80mA; ≤80mA; ≤150mA; ≤80mA;
    Ibu ibu ugbu a 40mA; 40mA; 60mA; 40mA;
    VOH Min.Vcc x 70%; Min.Vcc - 2.5v Min.3.4v Min.Vcc - 1.5v
    VOL Oke.0.4v Oke.0.4v Oke.0.4v Oke.0.8v
    MechanicalData
    Malite Torque 4 x10-3N•M
    Oke. Nbudata Shaft Axial: 29.4N, Radial:19,6N;
    Oke. Ọsọ Rotary 3000rpm
    Ibu 160-200 g
    Data gburugburu
    Okpomọkụ na-arụ ọrụ. -30 ~ 80 ℃
    Okpomọkụ nchekwa. -40 ~ 80 ℃
    Ọkwa nchekwa IP54

     

    Isi njikọ:
    Signal Vcc GND

    D0

    D1

    D2

    D3

    D4

    D5

    D6

    D7

    D8

    D9

    Agba Agba aja aja Ọcha

    Uhie/acha anụnụ anụnụ

    Agba ntụ/acha odo odo

    Acha anụnụ anụnụ

    Akwụkwọ ndụ akwụkwọ ndụ

    Pink

    Purple

    Ọcha

    Agba ntụ

    Odo

    Agba aja aja

     

    Koodu ịtụ

    Akụkụ

     

    Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
    1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
    2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu ntinye: 1) ntinye ntinye 2) ihe mkpuchi zuru oke 3) Dọrọ Sensọ Wire 4) Manual Pluse Generator
    3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
    5. Họrọ ebe obibi Dia na shaft dia. nke koodu;
    Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

    Gertech Equivalent dochie:
    Omron:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
    Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series

    Nkọwa nkwakọ ngwaahịa
    A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;

    Ajụjụ:
    1) Kedu otu esi ahọrọ koodu nzuzo?
    Tupu ịtụ koodu koodu, ị nwere ike mara nke ọma ụdị koodu ị nwere ike ịchọ.
    Enwere koodu ntinye agbakwunyere na koodu nzuzo zuru oke, mgbe nke a gasịrị, ngalaba ọrụ ire ahịa ga-abara gị uru.
    2) Kedu nkọwapụta arịrịọsted tupu ịtụ koodu koodu?
    Ụdị ihe nnochita—————-osisi siri ike ma ọ bụ ihe njiri oghere oghere
    Dayameta Mpụga———-Nkeji 25mm, MAX 100mm
    Oghere Oghere—————Ogwe Obere 4mm, Ogwe kacha 45mm
    Usoro & Mkpebi———Nkeji 20ppr, MAX 65536ppr
    Ọnọdụ mmepụta sekit --- ị nwere ike ịhọrọ NPN, PNP, Voltage, Push-pull, Line ọkwọ ụgbọ ala, wdg.
    Voltaji na-enye ike——DC5V-30V
    3) Otu esi ahọrọ koodu nzuzo ziri ezi site n'onwe gị?
    Nkọwa nkọwa kpọmkwem
    Lelee akụkụ nwụnye
    Kpọtụrụ onye na-eweta ngwaahịa ka ị nweta nkọwa ndị ọzọ
    4) Iberibe ole ka ịmalite?
    MOQ bụ 20pcs. Obere obere dịkwa mma ma ibu dị elu.
    5) Gịnị mere họrọ "Gertech” Ihe mkpuchi ika?
    Ndị otu injinia nke anyị chepụtara ma mepụta koodu ntinye niile kemgbe afọ 2004, a na-ebubatakwa ọtụtụ akụrụngwa eletrọnịkị nke koodu n'ahịa si mba ofesi. Anyị nwere ụlọ ọrụ Anti-static na enweghị uzuzu na ngwaahịa anyị gafere ISO9001. Ekwela ka àgwà anyị daa, n'ihi na àgwà bụ omenala anyị.
    6) Ogologo oge ole ka oge ndu gị dị?
    Oge ụzọ dị mkpirikpi - ụbọchị 3 maka ihe nlele, ụbọchị 7-10 maka mmepụta oke
    7) kedu ihe bụ amụma nkwa gị?
    Akwụkwọ ikike 1 afọ na nkwado teknụzụ ogologo ndụ
    8) Gịnị bụ uru ma ọ bụrụ na anyị na-aghọ gị gị n'ụlọnga?
    Ọnụ ahịa pụrụ iche, nchebe ahịa na nkwado.
    9) Kedu usoro iji bụrụ ụlọ ọrụ Gertech?
    Biko zitere anyị ajụjụ, anyị ga-akpọtụrụ gị ozugbo enwere ike.
    10) Gịnị bụ gị mmepụta ike?
    Anyị na-emepụta 5000pcs kwa izu. Ugbu a, anyị na-ewu nke abụọ nkebi ahịrịokwu mmepụta li


  • Nke gara aga:
  • Osote: